HJD-DP01 Industrial Print Head Oval Machine Digital Printer

Video

Features:

HJD Ten Ricoh G5 Print Head Industrial DTG Printer for Oval Machine：

1. Stable-the trolley uses a magnetic levitation motor drive system, which makes the start and stop more stable and quieter;

2. Fine -Using BYHX board control system, with Hosen's top-level RIPRINT software, it can achieve the best print quality and high printing accuracy;

3. Accurate-use double Y-axis ball screw with Japanese Fuji original private server motor , automatically correct the real-time position of double Y and make the positioning more accurate;

4. Economy-The ink circulation system based on Ricoh G5 head design automatically exhausts air during the circulation, no manual operation is required. It is ink saving and free of manual maintenance. Only 18ml ink is required for a single cleaning of ten heads;

5. Fast -industrial-grade pneumatic negative pressure ink supply system, small air volume can also make a big difference! The fastest automatic air replenishment takes only 0.01s, and the pressure of ink can be adjusted freely according to the status of the nozzle;

6. Comfortable-360-degree rotating worktable, mouse and keyboard anti-dropping support table, humanized left-origin trolley is closer to the Oval machine’s print head.

Detail Drawing

Magnetic Levitation Motor Drive System

Double Y-axis Ball Screw

Fuji Servo Motor

Japan THK Linear Guide

Oval Industrial Print Head Digital Printer

Parameter

Parameter of Hengjinding Ricoh G5 Oval machine Dtg Printer(Industrial)

Parameter		Details
Print Head		Japan Ricoh G5 industrial Print head 10, 12, 16 optional
Ink		CMYK
Suitable fabric		Cotton, linen, polyester, nylon, etc.
Production capacity	Rapid mode	635X1200 Dpi / 4pass / 4S/PC
	Production mode (recommended)	635X1800 Dpi / 6pass / 6S/PC
	Fine mode	635X2400Dpi / 8pass / 8S/PC
Dwell mode step height	10 Print Head	25cm
	12 Print Head	30cm
	16 Print Head	40cm
Oval machine installation requirements		Must be equipped with a digital dedicated station, the maximum error of the oval platen is less than or equal to 20 wires
Height from Print Head to medium		1.5mm~25mm Adjustable
Optimum Print height		3mm
Maximum printing width		700 (width of oval table) X820 (height of oval table) mm (according to the position of the guardrail outside the digital station of the Oval machine)
RIP software		Spain Neostampa, Hoson RIIN
Print Head maintenance		Automatic moisturizing tray
Print Head cleaning		Automatic cleaning, automatic scraping
Ink supply system		Industrial pneumatic negative pressure ink supply system, the fastest time for air supply is 0.01 seconds
Transmission system	X axis	Magnetic levitation linear motor/Japan Panasonic servo drive/Japan THK linear guide/German SIKO magnetic grid head
	Y axis	China Taiwan TBI precision silent ball screw / Japan Fuji servo motor, driver / Japan THK linear guide
	Z axis	Raise Hybrid Servo Motor/Japan Omron Positioning Sensor
	Moisturizing tray	Four-axis lifting moisturizing plate/Leisai hybrid servo motor/Japan Omron positioning sensor
Air consumption		0.6MPa，50L/Min（Dry, oil-free, moisture-free）
Air filter		The air inlet is equipped with an oil-water separator
Working environment		Temperature: 20~28℃ (should be low); humidity: 45%~65% (should be high)
Alarm system		Ink shortage alarm, servo motor overload alarm, spray car collision avoidance, Y-axis travel protection, spray car lift protection
Special feature		Independent Oval machine signal interaction; single-color ink pressure cleaning; arbitrary shutdown without ink flow, no clogging, and long-term shutdown after the head is moisturized; air cut print head protection device: The main air supply cut-off during printing or standby will not have any effect.
Total power		≤4.5KW

Parameter of Hengjinding Starfire1024 Oval machine white ink DTG Printer(Industrial)

Parameter		Details
Print Head		American Starfire 1024MA (25PL) 4 heads, 8 heads optional
Ink		White (special for starfire)
Suitable fabric		Cotton, linen, blended, etc. (the cotton content is not less than 80%)
Production capacity	Rapid mode(recommend)	635/725 X1200 Dpi / 4pass / 4S/PC(725 is high whiteness output)
	Production mode	635/725 X1800 Dpi / 6pass / 6S/PC(725 is high whiteness output)
	Fine mode	635/725 X2400 Dpi / 8pass / 8S/PC(725 is high whiteness output)
Dwell mode step height		24cm
Oval machine installation requirements		Must be equipped with a digital dedicated station, the maximum error of the oval platen is less than or equal to 20 wires
Height from Print Head to medium		1.5mm~25mmAdjustable
Optimum Print height		3.5mm
Maximum printing width		700 (width of oval table) X820 (height of oval table) mm (according to the position of the guardrail outside the digital station of the Oval machine)
RIP software		HosonRIIN UV version, T-shirt version, T-shirt Pro version
Print Head maintenance		Automatic moisturizing tray
Print Head cleaning		Automatic cleaning, automatic scraping, automatic Print Head moisturizing (automatic moisturizing when idle)
Ink supply system		Industrial pneumatic negative pressure ink supply system, the fastest time for air supply is 0.01 seconds
Transmission system	X axis	Magnetic levitation linear motor/Japan Panasonic servo drive/Japan THK linear guide/German SIKO magnetic grid head
	Y axis	China Taiwan TBI precision silent ball screw / Japan Fuji servo motor, driver / Japan THK linear guide
	Z axis	Raise Hybrid Servo Motor/Japan Omron Positioning Sensor
	Moisturizing tray	Four-axis lifting moisturizing plate/Leisai hybrid servo motor/Japan Omron positioning sensor
Air consumption		0.6MPa，50L/Min（Dry, oil-free, moisture-free）
Air filter		The air inlet is equipped with an oil-water separator
working environment		Temperature: 20~28℃ (should be low); humidity: 45%~65% (should be high)
alarm system		Ink shortage alarm, servo motor overload alarm, spray car collision avoidance, Y-axis travel protection, spray car lift protection
Special feature		Independent Oval machine signal interaction; single-color ink pressure cleaning; arbitrary shutdown without ink flow, no clogging, and long-term shutdown after the head is moisturized; air cut print head protection device: The main air supply cut-off during printing or standby will not have any effect.
Total power		≤4.5KW

Choose us, worry-free after-sales

01 Hardware training

Digital printer principle training

Digital printer equipment system components

Operating equipment hardware and programs

Maintenance of equipment parts

Handling of common faults

02 Software training

Printing and typesetting rip software installation

PHOTOSHOP picture processing channel

Print typesetting operations

Selection and modification of color software

Operation, management and maintenance of software

03 Free warranty period

Warranty Time:1 Year

In response to customer problems, after-sales communication groups will be established to help you at any time

During the free warranty period, the damage to equipment parts caused by man-made illegal operations shall be borne by the customer

The company bears the cost of all accessories (except Print Head and consumables) during the free warranty period

Lifetime maintenance service

Products